Skip to main content
Maritime

Water ingress switch / sensor - GL-10

Intended for water level detection in cargo holds, ballast tanks, and dry spaces of bulk carriers. 

The GL-10 Water ingress switch / sensor is designed to meet the requirements in SOLAS Ch. XII, Reg. 12, IMO Res. MSC 145(77) and IACS UI SC 180 rev. 1.
The sensor design contains no moving parts and is very resistant to clogging from cargo. Output signal is a current trigger on a 4 to 20 mA-wire line. The sensor is delivered connected and moulded to a flexible PUR-cable and installed into a Ø60 mm steeltube with a length of 0.2 m.
The GL-10 water ingress switch / sensor.
GL-10 housing for welded installations.
GL-10 housing for clamped installation.

Main specifications

  • Power supply: 24 VDC (10 to 35 V) 24 VDC (18 to 35 V)
  • Output signal: 4 to 20 mA/NC 4 to 20 mA/NC
  • Load: 0 to 600 Ohm (24 V) 0 to 650 Ohm at 18 V input
  • Type of protection: - EEx ia IIC T5
  • Accuracy: ±2.0 cm
  • Operating temperature: -25 to 85 °C (DNV class D)
  • Humidity: 100 % relative DNV class B
  • Vibration: 0.7 G 13.2-100Hz 1 mm p-p 3-13.2 Hz DNV class A
  • EMC: DNV Class B
  • Enclosure: IP68 DNV class D
  • Connection: PUR-cable with screening 4-wires
  • Weight: Approximately 0.5 kg
  • Ex classification: EEx ia IIC T5 according to Cenelec EN 50020

Services and support

  • 24/7 Technical support

    Our 24/7 technical support team is there to help at any time, day or night, wherever your vessel is.

  • Conversions, retrofit and refit

    We understand the importance of having the right parts, available in the right place, at the right time.

  • Training

    Ensure that your crew is properly and thoroughly trained. This will reduce operational risk, downtime and maximise return on asset investment.

Downloads

Data sheet

Related products and categories