Approved anti-fouling paints for echo sounder transducers

This is our list of approved anti-fouling paints for all types of echo sounder transducers.

Anti-fouling paint is a commercial product, and the manufacturers change their paints from time to time. This list of paint can be changed without further notice.

Important

  • Do not paint the transducer with traditional hull plating paint. Use only the correct type of approved paint specified.
  • Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean the transducer face.
  • Always refer to the manufacturer's documentation and data sheets for a complete procedure and for relevant safety information.

Jotun

Address: P.O.Box 2021, N-3248 Sandefjord, Norway
Website: http://www.jotun.com

Approved products

SeaMate M

  • Primer: Safeguard Universal ES
    Apply 80 μm wet film thickness (50 μm dry film thickness).
  • Paint: SeaMate M
    Apply 250 μm wet film thickness (125 μm dry film thickness).

SeaQuantum Ultra S

  • Primer: Safeguard Universal ES
    Apply 80 μm wet film thickness (50 μm dry film thickness).
  • Paint: SeaQuantum Ultra S
    Apply 250 μm wet film thickness (125 μm dry film thickness).

SeaQuantum Ultra III

  • Primer: Safeguard Universal ES / Safeguard Plus
    Apply 80 μm wet film thickness (50 μm dry film thickness).
  • Paint: SeaQuantum Ultra III
    Apply 250 μm wet film thickness (125 μm dry film thickness).

SeaForce 200 AV

  • Primer: Safeguard Universal ES AV
    Apply 70 μm wet film thickness (50 μm dry film thickness).
  • Paint: SeaForce 200 AV
    Apply 140 μm wet film thickness (90 μm dry film thickness).

More information

Data sheets and application guides can be downloaded from:
https://www.jotun.com

International Marine Coatings

Address: Stoneygate Lane, Felling, Gateshead, Tyne & Wear, NE10 0JY United Kingdom
Website: https://www.international-marine.com

Approved products

Intersleek 1100SR

  • Primer: Intersleek 737
    Apply 50 μm dry film thickness
  • Paint: Intersleek 1100SR
    Apply 150 μm dry film thickness

Intersmooth 7465Si SPC

  • Primer: Intergard 269
    Apply 40 μm dry film thickness
  • Paint: Intersmooth 7465Si SPC
    Apply 100 μm dry film thickness

Intersmooth 7670 SPC

  • Primer: Intersleek 731
    Apply 120 μm wet film thickness (75 μm dry film thickness)
  • Paint: Intersmooth 7670 SPC
    Apply 130 to 260 μm wet film thickness (75 to 150 μm dry film thickness)