Navigation & Ship handlingConfigured as a forward bridge, K-Sim Offshore facilitates training in navigation and maneuvering in various sea and weather conditions in an offshore environment. The K-Sim Offshore simulated… Dynamic PositioningMost Offshore Vessels have a Dynamic Positioning system onboard. By integrating K-Sim Offshore with KONGSBERG K-Pos DP system, it’s possible to conduct seatime reduction DP operator training… Platform SupportOperation of platform- and offshore support vessels in close proximity of offshore installations are demanding, and collisions may have severe consequences. Rig move: towing & tuggingK-Sim Offshore can be configured to support ocean towing and installation of floaters on location. The towing scenario can include one or multiple towing vessels, towlines and bridles for towing… Anchor handlingK-Sim Offshore enables procedure development and realistic training on critical anchor handling operations, with focus on navigator and winch operator roles. Buoy loadingK-Sim Offshore supports training of shuttle tanker/offtake tanker bridge crew and assisting/support vessel crew during buoy loading. The simulator system supports both the option of buoy loading with… Tandem loadingK-Sim Offshore supports training of shuttle tanker/offtake tanker bridge crew and assisting/support vessel crew during tandem loading. For DP2 shuttle tankers, the simulated bridge is integrated with… Heavy lift & pipe-layTo conduct safe pre-mission planning and rehearsal in complex heavy lift operation projects, K-Sim Offshore provides customized solutions comprising special hydrodynamic vessel models including… Subsea vessel operationsSubsea vessel operations during construction and IMR (inspection, maintenance and repair) are fully supported by the K-Sim Offshore simulator. Advanced hydrodynamic DP vessel models equipped with… Deck Operator trainingA special feature in K-Sim Offshore is the possibility to train deck personnel’s procedures prior to a mission. Any deck environment can be modelled and visualized with relevant tools and actions… Windmill InstallationFor familiarization and training of bridge crew on jack-up wind farm installation vessels, K-Sim Offshore can offer customized hydrodynamic simulation models with control room instrumentation and… Rig Control Room OperationsIntegrated with K-Sim Engine, KONGSBERG K-Pos DP and K-Sim Offshore Crane, K-Sim Offshore can be configured as a rig control room and enable interdepartmental team training for the crew by allowing… Semi-Submersible Rig Operations Advanced hydrodynamic DP models are available for drilling and accommodation semi-submersibles. These high-fidelity models may include navigation bridge, KONGSBERG K-Pos DP2/3, power management and… Drillship OperationsK-Sim Offshore provides training for drillship crew. A configuration of drilling vessel bridge, rig control room, engine rooms and cranes can be fully integrated to support team training as well as… Jack-Up Rig OperationsK-Sim Offshore facilitates tow-master training for jack-up rig-move and installation on site. An advanced hydrodynamic jack-up model with rig control-room and instrumentation enables training of… Gangway MonitoringFor familiarization and training of crew in operation and use of telescopic gangways, K-Sim Offshore provides gangway features, which are available for installation on board the rig or in training… Ballast HandlingHandling of a semi-submersible platform is a demanding and complex task. Technical, commercial, environmental and safety requirements will always represent critical, and often conflicting, factors… Crisis ManagementK-Sim Offshore is ideally suited to prepare offshore crew and emergency management personnel for unexpected events. The system provides action planning and training for crises where decision making,…