New product!

We have just added this product to our product portfolio.

K-Sim® Engine MAN B&W 5L90MC VLCC L11-V

Experience realistic simulation of a very large crude carrier powered by a MAN B&W slow-speed turbocharged diesel engine. The model dynamically responds to operational changes, ensuring accurate interaction between the main engine and ship systems for enhanced training and analysis.

Realistic VLCC Engine Simulation

The main engine simulator model respond dynamically to variations in operation and conditions of the ship model, and the ship model have mutual responses to the main engine model.

Skip to content

High-Fidelity Engine Model – Compliant with Industry Standards

The K-Sim Engine MAN B&W 5L90MC VLCC L11-V model is built on real engine data, ensuring highly realistic dynamic behavior. It features a comprehensive electrical and steam plant setup, including multiple generators, boilers, turbines, and control stations. Fully compliant with STCW Regulation 1/12 and DNVGL-ST-0033, this simulator exceeds industry training requirements.

K-Sim Engine MAN B&W 5L90MC – Model Specifications

  • Engine Type: MAN B&W 5L90MC

  • Cylinder Bore: 90 cm

  • Piston Stroke: 290 mm

  • Number of Cylinders: 5

  • Air Coolers: 2

  • Turbochargers / Speed: 2 / 8000 RPM

  • Maximum Continuous Rating (MCR): 17,400 kW

  • Engine Speed: 76 RPM

  • Mean Indicated Pressure: 13 bar

  • Scavenge Air Pressure: 2.1 bar

  • Propeller: 5 blades / 1.2 P/D pitch

  • Specific Fuel Oil Consumption: 168 g/kWh

  • Fuel Type: DO / HFO 700 cSt

  • Vessel Length Overall: 305 m

  • Breadth Moulded / Depth Moulded: 47 m / 30.4 m

  • Deadweight: 187,997 tons

  • Speed: 14 knots

Training Objectives

The K-Sim Engine MAN B&W 5L90MC VLCC L11-V model is designed to support both basic and advanced training for marine engineers.

  • Junior Engineers: Learn fundamental engine room operations.
  • Senior Engineers: Train in emergency handling and troubleshooting.
  • Senior & Chief Engineers: Optimise operations, fuel efficiency, and energy conservation.

By providing realistic simulation of a full-scale engine room, K-Sim Engine ensures a deep understanding of total plant operations through controlled, hands-on training.

Model Main Specifications

The K-Sim Engine MAN B&W 5L90MC VLCC L11-V features high-fidelity engine room systems for comprehensive training, including:

  • Cooling & Water Systems: Sea & LT/HT fresh water, FW generator
  • Power Generation: Diesel, shaft, and turbo generators
  • Air & Fuel Systems: Compressors, separators, viscometers, FO high-pressure system
  • Steam & Oil Systems: D-type boiler, exhaust boiler, lubricating oil, stern tube, and propeller servo LO system
  • Control & Monitoring: Bridge, ECR, local control, autopilot, cylinder indication diagrams
  • Safety & Environmental: CO₂ fire extinguishing, emission control (SCR, scrubbing, water emulsification)

Note: Specifications may change without prior notice.

Lifecycle support for your vessel