New product!

We have just added this product to our product portfolio.

K-Sim® Engine MAK 6M453 River M22

K-Sim® Engine MAK 6M453 River M22

The K-Sim Engine MaK 6M453 River M22 model simulates the operation of a river vessel with a deadweight of 1599 tons, featuring two medium-speed turbocharged diesel engines and dual propellers, providing a realistic training environment for marine engineers.

Skip to content

Model 

The M22 MaK 6M453 River model features an electrical power plant with two diesel generators and one emergency generator. The steam plant includes an oil-fired boiler. Both the control room operator station and the associated panels are integrated into the system for comprehensive training.

Meeting Industry Standards

Kongsberg Maritime simulator models exceed the requirements set by the STCW Convention, Regulation 1/12, and meet DNV GL’s standard DNVGL-ST-0033 for Maritime Simulator Systems, ensuring high-quality and industry-compliant training solutions.

Model features and details

  • Engine Type: Krupp MaK 6M453
  • Cylinder Bore: 320 mm
  • Piston Stroke: 420 mm
  • Number of Cylinders: 6
  • Air Coolers: 1
  • Turbochargers: 1
  • Corresponding Engine Speed: 550 RPM
  • Mean Effective Pressure: 13 bar
  • Specific Fuel Consumption: 238 g/kWh
  • Propeller Diameter: 2.60 m
  • Propeller Speed: 310 RPM
  • Length Overall: 108.0 m
  • Breadth Moulded: 11.4 m
  • Draught: 2.9 m
  • Tonnage: 1599 GRT
  • Speed: 10.2 knots

Training objectives

The K-Sim Engine MaK 6M453 River M22 model serves as a valuable tool for both basic and advanced training of marine engineers. The key training objectives include:

  • Junior Engineers: Learning fundamental engine room operations.

  • Senior Engineers: Gaining expertise in emergency operations and troubleshooting.

  • Senior and Chief Engineers: Mastering optimal operations, fuel efficiency, and energy conservation.

Training objectives

These objectives are achieved through controlled training scenarios, providing a deeper understanding of overall plant operations via realistic simulations that mirror a real engine room environment.

The K-Sim Engine MaK 6M453 River M22 model provides high-fidelity simulations of engine room systems, covering essential operations for marine engineers. The key systems involved in training include:

  • Fuel Oil Supply & Fuel Oil Tanks
  • Diesel Oil Purifier
  • Main Sea Water System & Ballast Tanks
  • Main Engine 1 & 2 Power Systems
  • Main Engine 1 & 2 Fresh Water Systems
  • Main Engine 1 & 2 Lubrication Oil Systems
  • Main Engine 1 & 2 Turbocharger Systems
  • Main Engine 1 & 2 Sea Water Systems
  • Port & Stbd Propeller Gear LO Systems
  • Port & Stbd Propeller Servo LO Systems
  • Compressed Air System (2 Start Air Compressors & 1 Service Air Compressor)
  • Bilge Wells & Bilge Separator
  • Electric Power Plant (Two Diesel Generators, One Emergency Generator & Power Management)
  • Steam System (Oil Fired Boiler)
  • Remote Control Panels (Bridge, ECR, and Engine-side)

This setup ensures comprehensive training for understanding the operation and management of key systems in a marine engine room, preparing engineers to handle both routine and emergency scenarios.

(Note: Specifications subject to change without prior notice.)

Lifecycle support for your vessel